Horse HM-30 Unidirectional Carbon Fiber Fabric

Horse HM-30 Unidirectional Carbon Fiber Fabric

Price：$Bulk Pricing Available

Contact to Buy

Product Brief

The Horse HM-30 is a high-strength Grade I unidirectional carbon fabric at 300 g/m² and 0.167 mm nominal thickness. It provides about 50% more fiber per layer than HM-20, making it the “sweet spot” for medium-load upgrade of main beams, bridge decks and columns—fewer layers than HM-20, easier to handle than HM-43/60.

1. Product Specifications

2. Product Features 

· Balanced areal weight: efficiency vs workability　

· Reduces overlay layers for same fiber amount　

· Suitable for flexural and shear members　

· Stable batch quality for project-scale use　

Note: Specific performance indicators are subject to GBTECH confirmation.

3. Applications

· Main-beam flexural strengthening　

· Bridge deck reinforcement　

· Column bend/shear upgrade　

· Medium load-capacity increase　

4. Customization Services & Options 

Custom width, roll length, and epoxy system available. Provide concrete grade and target load increase for solution recommendation.

5. Pricing & Purchase Information

· Price: by specification and order volume　

· MOQ: Confirmed with quotation　

· Shipping: Worldwide　

· Stock: Subject to confirmation　

6. FAQ 

Q: HM-20 or HM-30?　

A: Small upgrade and many curves → HM-20; main beam medium upgrade → HM-30. 　

Q: Can HM-30 replace HM-20?　

A: By fiber mass 1 layer HM-30 ≈ 1.5 layer HM-20; final layer count follows structural calculation.  So if the original design calls for 3 layers of HM-20, 2 layers of HM-30 would theoretically provide near-equivalent fiber content. However, whether replacement is feasible in practice depends on:Whether corners/curved surfaces allow a thicker fabric to conform properly;Whether lap length and anchorage requirements are satisfied;Whether epoxy consumption and application process need adjustment;The final layer count must be re-verified by structural calculation.