500×600×3 mm T300 Matte Carbon Fiber Sheet

2026.09.13

500×600×3 mm T300 Matte Carbon Fiber Sheet

Price：$Bulk Pricing Available

Contact to Buy

Description

Product overview

GBTECH 500×600×3 mm carbon fiber sheet is a flat T300 composite plate with a matte surface. An extended rectangular blank for longer panel layouts.

The 600 mm side provides additional layout length compared with a 500×400 or 500×500 mm blank. This format can be evaluated for elongated panels and nesting patterns with longer components.

Product specifications

Specification	Value
Product number	GB-CF-S30-TW-M-500x600x3-58
Fiber grade	T300
Sheet format	500×600 mm
Nominal thickness	3 mm
Surface	Matte; catalogue TW designation
Catalogue heat resistance	150°C; duty-cycle validation required
Lay-up / weave construction	Confirm technical data before design
Weight / tolerances	Confirm with quotation

Selecting this format

The 3 mm thickness may suit panel-oriented layouts, but large unsupported spans need deflection checks.

The nominal blank area is 0.30 m². Plan part nesting, edge allowances and cutting kerf before estimating the number of usable parts.

Applications to evaluate

Elongated equipment covers
Long instrument panels
Multi-part cutting layouts

These are possible design uses, not guaranteed strength or safety-critical approvals. Check fibre direction, support locations, allowable deflection and fastener loads.

Machining and assembly

Use tooling and dust control suitable for carbon-fiber composites. Protect nearby electronics from conductive dust, finish cut edges as required, and validate bonded, clamped or fastened connections before use.

Support the plate during machining and review hole edge distances. Electrically isolate carbon from dissimilar metals where the joint environment creates galvanic-corrosion risk.

Temperature-use note

The catalogue lists nominal heat resistance of 150°C. This is not a universal continuous-service temperature: confirm the test method, exposure duration, load and safety margin for the intended duty cycle.

Frequently asked questions

Is 3 mm a guaranteed final tolerance? It is the listed nominal thickness. State the required tolerance before ordering.

Can the sheet be cut to a drawing? Submit your dimensioned drawing for review; machining scope and acceptance criteria must be agreed with the quotation.

Request a quote

Request a quotation with the product number, required quantity, final dimensions or drawing, tolerance requirements and delivery country. Confirm pricing, packaging, availability and lead time with GBTECH before ordering.